manualshive.com logo in svg

ABB REACT-3.6-TL, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB REACT-3.6-TL Скачать руководство пользователя страница 54

- 54 -

000560AG

4 - Lifting and transport

T

ransport of the equipment

transportation of the equipment, especially by road, must be carried 
out using appropriate vehicles and methods to protect the components 
(particularly electronic components) from violent shocks, humidity, 
vibration, etc.

During handling, do not make any sudden or fast movements that can create dangerous 
swinging.

T

ransport of the REACT-BATT-AP1

The REACT-BATT-AP1, as it falls within the category of dangerous 
goods (UN 3480 lithium-ion battery, class 9, group II), must comply with 
the rules of the ADR (European Agreement concerning the International 
Carriage of Dangerous Goods by Road) as regards packaging, transport 
and marking.
For more information, consult the website of the Ministry of Infrastructure 
and Transport on page http://www.mit.gov.it/mit/site.php?o=vc&lm=2&id_
cat=207).
Exemptions from the provisions:

• the “Ancillary rule” (1.1.3.1 c ADR)

• the “1,000 Units rule” (1.1.3.6 ADR)

In order to guarantee full operation and the validity of any guarantees, 
the REACT-BATT must be put into service within 3 months at most of the 
date of delivery by ABB to the recipient of the goods. 
Should the guarantee be used, the date of commissioning must be 
demonstrated by submitting to ABB the commissioning report or the 
invoice to the end user.

The ambient temperature allowed for transport is from -20°C to +40°C. 
The manufacturer guarantees the characteristics of the REACT-BATT-
AP1 only if the aforementioned condition is respected.

O

verview of the “Ancillary rule” and the “1000 units rule”

For road transport of the REACT-BATT-AP1 the rules of the European 
Agreement concerning the International Carriage of Dangerous Goods 
by Road (ADR) must be complied with. 

In the following notes, ABB wishes to provide a short overview of the 
rules to be complied with for the carriage of dangerous goods contained 
in the “Ancillary rule” and the “1,000 units rule”. 

ABB does not accept any responsibility for the correctness and completeness of what is set 
out. The installer must check and comply with all the regulations in force.

Скачано

 

с

 

сайта

 

интернет

 

магазина

 https://axiomplus.com.ua/

Содержание REACT-3.6-TL















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды