- 47 -
000558AG
3 - Safety and accident prevention
T
hermal and electrical hazard
CAUTION: the removal of guards or covers is permitted by qualified personnel
only after the equipment has been put out of service and after the period of
time indicated on the label has passed. This is to let the components cool
down and allow the internal capacitors to discharge.
When the equipment has just been switched off, it may have hot parts
as a result of overheating of the heated surfaces (e.g.: transformers,
accumulators, coils, etc.) so be careful where you touch.
For all the safety aspects relating to the battery unit, please refer to the safety sheet provided
with the product.
C
lothing and protection of personnel
ABB
has done its best to eliminate sharp edges and corners, but as this
is not always possible you are advised always to wear theclothing and
personal protection equipment provided by the employer.
Personnel must not wear clothes or accessories that could start fires or generate
electrostatic
charges or, in general, clothing that can compromise personal safety.
All operations on the equipment should be performed with suitably
insulated clothing and tools.
E.g.: insulating gloves, class 0, RC category
Maintenance operations may only be performed after the correct
procedure for taking the equipment out of service has been carried out.
Personnel must NOT go near the equipment with bare feet or wet hands.
The maintenance technician must in any case ensure that no one else can
switch on or operate the equipment during the maintenance operations,
and should report any anomaly or damage due to wear or ageing so that
the correct safety conditions can be restored.
The installer or maintenance technician must always pay attention to the
work environment, ensuring that it is well-lit and there is enough room to
ensure an escape route.
During installation, consider whether the
noise emitted in that particular
environment
might exceed the legal thresholds (less than 80 dBA); if so,
suitable ear protection must be worn.
MO
DE
L:
IP6
5
5 m
inu
tes
Mad
e in
Italy
DIN
V V
DE
01
26
-1-
1
PR
OTE
CTIV
E CL
AS
S:
I
-25
to
+6
0 °
C
-13
to
+1
40
°F
SO
LA
R INV
ER
TE
R
ww
w.ab
b.c
om
/sola
r
Скачано
с
сайта
интернет
магазина
https://axiomplus.com.ua/
