manualshive.com logo in svg

ABB REACT-3.6-TL, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB REACT-3.6-TL Скачать руководство пользователя страница 40

- 40 -

000555AG

2 - Characteristics

F

unctionality and components of the equipment

Configurable relay (ALARM relay)

The inverter is equipped with a configurable switching relay, which can be 

used in different operating configurations that can be set in the dedicated 

menu. A typical example of its application is closing the contact when an 
alarm is triggered.

Remote switching on and off (Remote ON-OFF)

This command can be used to switch off/switch on the inverter via an 
external (remote) command.
This function must be enabled in the menu and, when it is active, 
switching on the inverter will not only be dictated by the presence of the 
normal parameters that allow the inverter to connect to the grid, but will 
also depend on the external on-off command.

Reactive power feed into the grid

The inverter is able to produce reactive power and can feed this power 
into the grid when the phase factor is set. Managing the feed can be 
controlled directly by the grid company via a dedicated RS485 serial 

interface  or  set  by  the  display  or  through  the  configuration  software, 

Aurora Manager LITE.
Power feeding management modes vary according to the country of 
installation and the grid companies. For detailed information on the 
parameters and characteristics of this function, please contact ABB 
directly.

Limiting the active power fed into the grid

The inverter, if enabled and set using the display or the configuration 

software, can limit the amount of active power fed into the grid by the 
inverter to the desired value (expressed as a percentage).

Data transmission and control

The inverter or a network of several inverters can be monitored locally 
or remotely by using the integrated web server or dedicated mobile app.
The system also has an RS-485 serial interface (public communication 
protocol “Modbus RTU”).

SD card

The inverter is equipped with a slot for insertion of an SD Card memory. 
The maximum size of the SD Card is 4 GB. Its main function is to allow 

the inverter firmware to be updated in a few simple steps.

The  most  up-to-date  inverter  firmware  version  is  available  from  the 

website https://registration.abbsolarinverters.com

Скачано

 

с

 

сайта

 

интернет

 

магазина

 https://axiomplus.com.ua/

Содержание REACT-3.6-TL















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды