ABB PVS800-57B, Руководство по оборудованию, Страница: 59 / 84

Technical data 59
Applicable standards
CE marking – Pending
A CE mark is attached to the inverter to verify that the unit follows the provisions of the
European Low Voltage and EMC Directives.

Compliance with the European Low Voltage Directive
The compliance with the European Low Voltage Directive has been verified according to
standard EN 62109.

Compliance with the European EMC directive
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. EMC standards EN 61000-6-2:2005, EN
61000-6-4:2007, and EN55011:2016 cover requirements stated for electrical and
electronic apparatus intended for use in industrial environments.
Compliance with EMC standards EN 61000-6-2:2005, EN
61000-6-4:2007, and EN55011:2016 –
Pending
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its
locality.
Standard Name Certification
EN/IEC 62109-1:2010 Safety of power converters for use in photovoltaic power
systems. Part 1: General requirements Pending
EN/IEC 62109-2:2011 Safety of power converters for use in photovoltaic power
systems. Part 2: Particular requirements for inverters Pending
EN/IEC 61000-6-2:2005 Electromagnetic compatibility (EMC) – Part 6-2: Generic
standards – Immunity for industrial environments Pending
EN/IEC 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: Generic
standards – Emission standard for industrial environments Pending
EN55011:2016
(CISPR11:2015) Industrial scientific and and medical equipment (ISM) radio
frequency disturbance characteristics limits and methods of
measurement Pending