13
7 Device to network
You can configure the IP address and the hostname of the
device. The device supports the DHCP function.
The device is shipped with DHCP enabled.
The default IP address with DHCP disabled is
192 .168 .1 .122
.
The default hostname is
my-hostname
.
Network related parameters are accessible through the HMI
menu.
Once a server is assigned an IP address, the factory default IP
address and hostname will be replaced by the ones assigned
through the DHCP server.
To check the IP settings, use the Flowmeter HMI menu to go to
Communication
>
EtherNet
>
Internet layer
>
Host IP address
.
8 EtherNet/IP
Device profile
The device corresponds to the profile 0x43, Generic Device,
(keyable).
Supported standards and protocols:
• Common Industrial Protocol (CIP™) Vol 1, Ed 3.25
• Ethernet/IP Adaptation of CIP Vol2, Vol 2, Ed 1.23.