ABB PickMaster Twin - PowerPac Скачать руководство пользователя страница 431

Страница: 431 / 454

7.4.5 Positions are used twice

Error description

The robot uses every position twice.

Probable causes

There can be several causes why the robot uses every position twice. To check
all the possible causes the following must be verified.

•

If I/O trigged predefined positions or containers are used, set the

SyncSeparation

filter distance to avoid double and ghost triggers.

•

If vision is used, increase the overlap and position filter.

•

Clear the checkbox

Same level only

in the Position Source.

If a robot downstream in an ATC group tries to use an already used item, then the
Work Area order in the Position Source is incorrect.

Application manual - PickMaster® Twin - PowerPac

431

3HAC064218-001 Revision: B

7 Troubleshooting

7.4.5 Positions are used twice

Содержание PickMaster Twin - PowerPac







































































































































































































































































































































































































































































Результаты поиска

Содержание PickMaster Twin - PowerPac

Отзывы:

ABB PickMaster Twin - PowerPac, Руководство по применению, Страница: 431 / 454

Результаты поиска

Содержание PickMaster Twin - PowerPac

Отзывы: