ABB PCS100 AVC-20 Скачать руководство пользователя страница 80

Страница: 80 / 126

PCS100 AVC-20

User Manual

10.1

Cybersecurity

10.1.1

Cybersecurity Disclaimer

This product is designed to be connected to and to communicate information and data via a network interface. It

is Customer’s sole responsibility to provide and continuously ensure a secure connection between the product

and Customer network or any other network (as the case may be). Customer shall establish and maintain any

appropriate measures (such as but not limited to the installation of firewalls, application of authentication

measures, encryption of data, installation of anti-virus programs, etc.) to protect the product, the network, its

system and the interface against any kind of security breaches, unauthorized access, interference, intrusion,

leakage and/or theft of data or information. ABB and its affiliates are not liable for damages and/or losses

related to such security breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data

or information.

10.1.2

List of User/System accounts in ABB delivery

Linux root account is only available as a service account used with SSH. SSH port is disabled by default, however,

it can be enabled through parameter settings.

10.2

Remote Web Pages

The Graphical Display Module contains a set of web pages that are similar in format to the standard GDM pages

described in section 6.1.

Graphic Display Module (GDM)

They may be accessed via the Ethernet port of the GDM

and viewed on a remote PC using any standard web browser.

The following pages are supported:

Status page

Event Log

Product page

Summary page

Service page

Menu page (if enabled via parameter

26 GDM Remote Menus

)

Figure 10

2: PCS100 AVC

20 Remote Web Pages Status Page

Each page contains the

Navigation Panel, and

the Status Bar, and

each page is accessed

by clicking the buttons

using a mouse.

Start(I)/Stop(O)/Reset

functionality is only

supported

through

these pages if remote

menu access is enabled

via parameter

A31 GDM

Control Enable

Note: The following pictures are examples and the values on the display do not represent all models.

Содержание PCS100 AVC-20






























































































































Результаты поиска

Содержание PCS100 AVC-20

Отзывы:

ABB PCS100 AVC-20, Руководство пользователя, Страница: 80 / 126

Результаты поиска

Содержание PCS100 AVC-20

Отзывы: