ABB PCS100 AVC-20 Скачать руководство пользователя страница 41

Страница: 41 / 126

PCS100 AVC-20

User Manual

6.1.4.2

Additional Event Information

For events in the event or fault log pages that display an icon, clicking the respective line in the event log

displays additional information about the event.

The Modules section displays which of the PCS100 modules in the PCS100 AVC-20 are reporting the event.

The Description field contains an extended description of the event.

The Recommended Action field is only visible when logged into the GDM at the ‘Tech’ level as it is primarily

provided to aid trained ABB service agents resolve the fault.

Both the Description and Recommended Action fields are also presented in the Table 9-2: PCS100 AVC-20 Event

codes and descriptions

Figure 6

9: Additional event information

6.1.5

Product Page

The product page records information about the product and the site.

Site

Information

Product

Information

Date and
Time

Hour Meters

Network
Settings

Figure 6

10: GDM Product page

Содержание PCS100 AVC-20






























































































































Результаты поиска

Содержание PCS100 AVC-20

Отзывы:

ABB PCS100 AVC-20, Руководство пользователя, Страница: 41 / 126

Результаты поиска

Содержание PCS100 AVC-20

Отзывы: