ABB OmniCore S Series Скачать руководство пользователя страница 225

Страница: 225 / 236

10.5 Restore the system

When do I need this?

We recommend performing a restore:

•

If you suspect that the program file is corrupt.

•

If any changes made to the instructions and/or parameters settings did not
prove successful, and you want to return to the previous settings.

During the restore, all system parameters are replaced and all the modules from
the backup directory are loaded.

The Home directory is copied back to the new system’s HOME directory during
the restart.

Restore the system

1 On the start screen, tap

Settings

, and then

Backup & Recovery

2 On the

Backup & Recovery

menu, tap

Restore

The restore dialog is displayed.

xx1900000153

Browse for the location where the backup is located and select which of the
following options should be restored:

•

Safety Settings

3 Tap

Restore

to restore the selected options.

The restore is performed, and the system is restarted.

Operating manual - OmniCore

225

3HAC065036-001 Revision: E

10 Install, update, restart, and other configuration

10.5 Restore the system

Содержание OmniCore S Series












































































































































































































































Результаты поиска

Содержание OmniCore S Series

Отзывы:

ABB OmniCore S Series, Руководство по эксплуатации, Страница: 225 / 236

Результаты поиска

Содержание OmniCore S Series

Отзывы: