ABB OmniCore E10, Руководство по эксплуатации продукта

Страница: 105 / 230

4 Maintenance
4.1 Maintenance schedule, OmniCore
General
The controller must be maintained at regular intervals to ensure its function. The
activities and intervals are described in this section.
Activities and intervals
Detailed in section: Interval Maintenance
activity Equipment
Inspecting the OmniCore E10 con-
troller on page 106 12 months
i
Inspection Complete controller
Inspecting the OmniCore E10 con-
troller on page 106 6 months
i
Inspection System fans
Cleaning of the controller cabinet
on page 107 Cleaning Control cabinet
Cleaning the FlexPendant on
page 108 When needed Cleaning FlexPendant
Function test of emergency stop on
page 110 12 months Function test Emergency stop
(FlexPendant)
Function test of manual, auto, and
manual full speed mode with Flex-
Pendant on page 111 12 months Function test Manual, auto and
manual full speed
mode with FlexPend-
ant
Function test of three-position en-
abling device on page 112 12 months Function test Enable device
Function test of safety switches on
page 113 12 months Function test Safety switches
Function test of Automatic Stop on
page 114 12 months Function test Auto stop (tested if
used)
Function test of General Stop on
page 115 12 months Function test General stop (tested
if used)
Function test of external emergency
stop on page 116 12 months Function test External emergency
stop (tested if used)
Function test of ESTOP_STATUS
output on page 117 12 months Function test ESTOP_STATUS
output (tested if
used)
Function test of reduced speed
control on page 118
.
During commis-
sioning Function test Reduced speed
control
i
The interval depends on the working environment of the equipment: a cleaner environment may
extend the maintenance interval and vice versa.
Function test after replacement of component
After replacing a component in the controller, the function tests should be
performed. See
Function tests on page 110 .
Product manual - OmniCore E10 105
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
4 Maintenance
4.1 Maintenance schedule, OmniCore