Installation and Start-up Guide for NPBA-01
1-1
Chapter 1 – Introduction to This Guide
Overview
This chapter contains a description of the Start-up and Installation
Guide and a list of related publications.
Intended Audience
The Guide is intended for the people who are responsible for installing,
commissioning and using a PROFIBUS Adapter Module with the
ACS 600 frequency converter. The reader is expected to have a basic
knowledge of electrical fundamentals, electrical wiring practices,
ACS 600 frequency converters, the use of the CDP 311 Control Panel
and the PROFIBUS protocol family.
What This Guide
Contains
The installation and start-up of the NPBA-01 PROFIBUS Adapter
Module are introduced in this guide.
It is assumed that the ACS 600 is installed and ready to operate before
starting the installation of the adapter module. For more information on
the installation and start-up procedures of the ACS 600, please refer to
the
ACS 601 or ACS 602/603/604 Installation and Start-up Manual.
Safety Instructions are featured in the first few pages of this guide.
Safety Instructions describe the formats for various warnings and
notations used within this guide. This chapter also states the safety
instructions which apply to the installation and operation of the
NPBA-01 Module.
Chapter 1 – Introduction to This Guide contains a short description
of the Guide and a list of related publications.
Chapter 2 – Overview contains a short description of the PROFIBUS
protocol and the NPBA-01 PROFIBUS Adapter Module, option
package delivery checklist and information on the manufacturer’s
warranty.
Chapter 3 – Mechanical Installation contains the module placing
and mounting instructions.
Chapter 4 – Electrical Installation contains cabling instructions, bus
termination and earthing instructions and the PROFIBUS Adapter
Module connection instructions.
Chapter 5 – Programming explains how to program the ACS 600
before the communication through the adapter module can be started.
Chapter 6 – Communication contains a description of the control
data sent by the PROFIBUS master to the drive and the feedback data
sent from the drive back to the master.
Chapter 7 – Fault Tracing explains how to trace faults with the Status
LEDs on the NPBA-01 Module.
