2101510MNA H | NGC82 00 AN D P GC 1000 US ER MA NUA L |
63
Figure 6-27: Stream Sequence
4.
When all desired changes have been made, click
Send
and then
Next
to move to the next
screen.
IMPORTANT NOTE
To enable or disable streams after completion of diagnostics, select
Stream
Sequence
from the Analyzer Operation screen. It is recommended that the diagnostic stream test
be performed on streams enabled after initial diagnostics. Select
Help
for additional information.
6.5.5
Update configuration
Save the device configuration file following setup:
1.
At the
Update Configuration
tab, click on the value field next to
Save Configuration Data
and click
Now
).
