ABB MultiMove Скачать руководство пользователя страница 58

Страница: 58 / 110

6 Programming

6.1. RAPID components

3HAC021272-001 Revision: H

ght

200

4-2008 ABB.

Functions

This is a brief description of each function in MultiMove. For more information, see the

respective function in Technical reference manual - RAPID Instructions, Functions and Data

types.

SyncMoveOn

is used to start synchronized movement mode.

SyncMoveOn

instruction will wait for the other task programs. When all

task programs have reached the

SyncMoveOn

, they will continue their

execution in synchronized movement mode. The move instructions in the
different task programs are executed simultaneously, until the instruction

SyncMoveOff

is executed.

A stop point must be programmed before the

SyncMoveOn

instruction.

SyncMoveOff

is used to end synchronized movement mode.

SyncMoveOff

instruction will wait for the other task programs. When

all task programs have reached the

SyncMoveOff

, they will continue

their execution in unsynchronized mode.

A stop point must be programmed before the

SyncMoveOff

instruction.

SyncMoveUndo

is used to turn off synchronized movements, even if not

all the other task programs execute the

SyncMoveUndo

instruction.

SyncMoveUndo

is intended for

UNDO

handlers. When the program

pointer is moved from the procedure,

SyncMoveUndo

is used to turn off

the synchronization.

MoveExtJ

(Move External Joints) moves one or several mechanical units

without TCP.

MoveExtJ

is used to move additional axes, in a task without any robot.

Instruction

Description

Function

Description

IsSyncMoveOn

is used to tell if the mechanical unit group is in synchro-

nized movement mode.

A task that does not control any mechanical unit can find out if the
mechanical units defined in the parameter Use Mechanical Unit Group are
in synchronized movement mode.

RobName

is used to get the name of the robot controlled by the task. It

returns the mechanical unit name as a string. If called from a task that does
not control a robot, an empty string is returned.

Continued

Continues on next page

Содержание MultiMove





































































































Результаты поиска

Содержание MultiMove

Отзывы:

Бренды по названию

Популярные бренды

ABB MultiMove, Руководство по применению

Результаты поиска

Содержание MultiMove

Отзывы:

Бренды по названию

Популярные бренды