ABB MultiMove Скачать руководство пользователя страница 54

Страница: 54 / 110

5 User interface specific for MultiMove

5.6. Select which tasks to start with START button

3HAC021272-001 Revision: H

ght

200

4-2008 ABB.

5.6. Select which tasks to start with START button

Background

The default behavior is that the programs of all NORMAL tasks are started simultaneously

when pressing the START button. However, not all NORMAL task programs need to run at

the same time. It is possible to select which of the NORMAL task programs will start when

pressing the START button.

If All Tasks is selected in the Task Panel Settings, the programs of all STATIC and

SEMISTATIC tasks with TrustLevel set to NoSafety can be selected to be started with the

START button, forward stepped with the FWD button, backward stepped with the BWD

button and stopped with the STOP button.

If Task Panel Settings is set to Only Normal tasks, all STATIC and SEMISTATIC tasks are

greyed out and cannot be selected in the task panel, Quickset menu (see Operating manual -

IRC5 with FlexPendant, section Quickset menu, Tasks). All STATIC and SEMISTATIC tasks

will be started if start button is pressed.

If Task Panel Settings is set to All tasks, STATIC and SEMISTATIC tasks with TrustLevel

NoSafety can be selected in the task panel. All selected STATIC and SEMISTATIC tasks can

be stopped, stepped and started. .

A STATIC or SEMISTATIC task, not selected in the task panel, can still be executing. This

is not possible for a NORMAL task.

Run Mode is always continuous for STATIC and SEMISTATIC tasks. the Run Mode setting

in the Quickset menu is only applicable for NORMAL tasks ( see Operating manual - IRC5

with FlexPendant, section Quickset menu Run Mode).

This will only work in manual mode, no STATIC or SEMISTATIC task can be started,

stepped or stopped in auto mode.

Task Panel Settings

The Task Panel Settings is found by tapping the ABB menu, followed by Control Panel,

FlexPendant and Task Panel Settings.

How to select tasks

Follow this instruction to select which ones of the tasks are to be started with the START

button.

Action

1. Set the controller to manual mode.

Continues on next page

Содержание MultiMove





































































































Результаты поиска

Содержание MultiMove

Отзывы:

Бренды по названию

Популярные бренды

ABB MultiMove, Руководство по применению

Результаты поиска

Содержание MultiMove

Отзывы:

Бренды по названию

Популярные бренды