—
A B B M E A S U R E M E N T & A N A LY T I C S | I N S T R U C T I O N
LST300_Terminals Description
- with Wiring Suggestions
Electrical connection
Make sure no power supply for LST300 before
installation.
Engineer must electrostatic discharge or use a
wristband before connecting the cable to the
LST300.
Ensure that the power supply is within the range
(12-42 V DC)
When the terminal cover of LST300 is opened, the
transmitter should be protected from dust and
moisture.
Figure 1. Cable Connection Area
Hot swappable power
supply is not recommended
Hot swap power supply (4 -
20 mA HART) is not
recommend for LST300.
Please turn off the power
supply before connecting the
LST300 to the power supply.
Warning
–
Physical
Injury
Electrostatic discharge
will cause material
damage
Open caps do not provide
contact protection, which
means touching conductive
devices can damage
electronic devices
(sometimes beyond repair)
due to electrostatic
discharge. Do not touch
conductive devices.
Attention
-
Property
Loss
