ABB IRB 4600 Foundry Prime, Руководство по эксплуатации продукта, Страница: 195 / 408

4 Repair
4.1 Introduction
Structure of this chapter
This chapter describes all repair activities recommended for the IRB 4600 Foundry
Prime and any external unit.
It is made up of separate procedures, each describing a specific repair activity.
Each procedure contains all the information required to perform the activity, for
example spare parts numbers, required special tools, and materials.
WARNING
Repair activities not described in this chapter must only be carried out by ABB.
Otherwise damage to the mechanics and electronics may occur.
Required equipment
The details of the equipment required to perform a specific repair activity are listed
in the respective procedures.
The details of equipment are also available in different lists in the chapter Reference
information on page 385 .
Safety information
There are general safety information and specific safety information. The specific
safety information describes the danger and safety risks while performing specific
steps in a procedure. Make sure to read through the chapter
Safety on page 17
before commencing any service work.
Note
If the IRB 4600 Foundry Prime is connected to power, always make sure that the
IRB 4600 Foundry Prime is connected to earth before starting any repair work.
For more information see:
• Product manual - IRC5
Product manual - IRB 4600 Foundry Prime 195
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.1 Introduction