ABB IRB 14000, Руководство по эксплуатации

Страница: 15 / 72

1.3.2 Recover from emergency stops
Overview
Recovering from an emergency stop is a simple but important procedure. This
procedure ensures that the manipulator system is not returned to production while
maintaining a hazardous condition.
Reset the latch of emergency stop buttons
All push-button style emergency stop devices have a latching feature that must
be released in order to remove the emergency stop condition of the device.
In many cases this is done by twisting the push-button as marked, but there are
also devices where you pull the button to release the latch.
Reset automatic emergency stop devices
All automatic emergency stop devices also have some kind of latching feature that
must be released. Please consult your plant or cell documentation to see how your
manipulator system is configured.
Recover from emergency stops
Action
Make sure the hazardous situation that resulted in the emergency stop condition no
longer exists. 1
Locate and reset the device or devices that gave the emergency stop condition. 2
Press the Motors On button on the Quickset menu on the FlexPendant to recover from
the emergency stop condition. 3
Operating manual - IRB 14000 15
3HAC052986-001 Revision: E
© Copyright 2015-2018 ABB. All rights reserved.
1 Safety
1.3.2 Recover from emergency stops