background image

Security Products
Infra-Red Motion Detector IR/KB

Technical Data

Description

The Passive Infra-Red Detector IR/K is an intrusion detector 

(VdS class B) that detects and signals motion within its 

detection range. It facilitates monitoring of an area with a 

volumetric IR range of up to 15 m and can be optionally set 

for a hall monitoring function up to 15 m.

The detector features undervoltage monitoring and is fitted 

with a walk test LED. The “Alarm” (movement) and “Tamper” 

messages are each provided by a floating contact.

The IR detector achieves its high level of immunity to false 

alarms by the use of high-quality HEX technology with 

12-fold pyro-element detection in every zone and through 

pulse counting.

Technical data

Voltage

12 V (9 V … 16 V DC)

Current IR/KB

Quiescent: 8 mA

Alarm without LED: 10 mA

Alarm with LED: 11 mA

Alarm and tampering

Break contact (NC), 

Contact load capacity 24 V DC, 

50 mA

Test input

Plus potential for LED activation

Effective infra-red range at

mounting height of 2.3 m

Angle = 86 °

Range = 15 m

Zones = 17 in 6 levels

Temperature range

-10 to +55 °C, environmental class II

Weight

135 g

Dimensions

110 x 66 x 42 

VdS approval:

IR/KB

Class B No.: G110502

1 =  Connection terminal

2 =  Cable entry

3 =  Connection cable

strain relief

4 = IR sensor

5 =  Cover screw

(do not unscrew 

fully)

 

Содержание IR/KB

Страница 1: ...eves its high level of immunity to false alarms by the use of high quality HEX technology with 12 fold pyro element detection in every zone and through pulse counting Technical data Voltage 12 V 9 V 16 V DC Current IR KB Quiescent 8 mA Alarm without LED 10 mA Alarm with LED 11 mA Alarm and tampering Break contact NC Contact load capacity 24 V DC 50 mA Test input Plus potential for LED activation E...

Страница 2: ... the cables connect them and provide strain relief using the enclosed cable ties Wiring The electronics are reinstalled after mounting the lower section Caution During all work the light sensitive sensor may not be touched To refit the cover engage the upper half using the two lugs and push both halves together there will be an audible click then tighten the screws Connect the detector as follows ...

Страница 3: ...t to ON with SW1 The red LED flashes to indicate detection of a slight movement If the red LED lights for 3 seconds this indicates detection of movement of a person within the detection range This message must cause a Circuit fault for this detector circuit when the detector zone is wired After connection of terminal 7 in accordance with the description and the VdS settings of the DIP switch the o...

Страница 4: ...ior notice With regard to purchase orders the agreed particulars shall prevail ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document We reserve all rights in this document and in the subject matter and illustrations contained therein Any reproduction disclosure to third parties or utilization of its contents in whole or in parts ...

Отзывы: