ABB IM300-I, Руководство по эксплуатации

Страница: 15 / 109

IM300 Intelligent Power Monitoring Instrument
13
In the single button mode, press the combinatorial button at the same time and
then loosen, you can enter the corresponding combinatorial button function; use the
combinatorial button again you will go back to the single button display screen
(except the fourth button combination).
3.2. Data read
（
non SOE
）
Display content Explanation
Four rows of in the data display
field
Display measurement data, including: current, voltage, power,
power factor, frequency and so on. Second, display parameters,
SOE, time, local operations, etc.
The “a“, “b“, “c“ denotes a ,b and C-phase respectively;
“∑“denotes summation; “Avg” denotes average; “-” denotes
minus; “n” denotes zero-sequence
Three at the top left corner
Consists of English semantic abbreviations, used to indicate the
current interface meaning: such as voltage 'U', current 'I', etc.
Current load size indication.
The actual load current is relative to the percentage of rated load
current, from left to right, respectively, Ia/Ib/Ic.
Digital identifier: on
off
The switch volume identification indicates the state of input of
the corresponding switch in 1 ~ 4(on or off).
Load character identifier
Inductance identifier(upper) indicate inductive load
Capacitance identifier(below) indicate capacitive load
Communication status identifier
Display this identifier indicates the communication work in
normal
Does not display this identifier indicate the communication out of
work
More warning signs
Display this sign indicates that there is more alarm, no indication
that there is no more alarm.
Switch quantization SOE identification. Display this sign indicates that there is a switch quantifier SOE
record in memory, which does not show that there is no switch
quantifier SOE record in memory.
10 little in data accumulated
display field
Display energy, temperature of the equipment and time.