ABB i-bus VC/S 4 1 Series, Руководство по эксплуатации продукта, Страница: 79 / 199

ABB i-bus® KNX PARAMETERS
7.4.39 Window status receipt
This parameter is used to define how the controller receives the window status.
Note
If no input is set as the window contact, the controller interprets the function as being deactivated.
If several inputs are set as window contacts, they are logically OR-linked. The controller reacts as soon
as one of the inputs sends the status "Window open".
Option
Deactivated The controller ignores the window status.
Via physical device input The controller checks which device input is parameterized as a window contact. The status of the
connected window contact is included in control.
The input is configured in the parameter window
Input x .
Via group object
The window status is received via group object
Window contact (master/slave)
.
The following dependent parameters are shown:
•
Window open if [controller]
The following dependent group objects are displayed:
•
Window contact (master/slave)
Prerequisites for visibility
• Parameter window Channel X \ Parameter window Application parameters \ Parameter Channel
function \ Option Controller channel
• The parameter is in the parameter window Channel X \ parameter window Application parameters .
7.4.40 Fill level status receipt
This parameter is used to define how the controller receives the fill level status of a condensate pan.
Note
If no input is set as the fill level sensor, the controller interprets the function as being deactivated.
If several inputs are set as fill level sensors, they are logically OR-linked. The controller reacts as soon
as one of the inputs sends the status "Fill level reached".
Option
Deactivated
The controller ignores the fill level status.
Via physical device input The controller checks which device input is parameterized as a fill level sensor. The status of the
connected fill level sensor is included in control.
Via group object The fill level status is received via the group object Fill level alarm .
• Fill level alarm
The following dependent parameters are shown:
•
Fill level reached if [controller]
Prerequisites for visibility
• Parameter window
Channel X
\ Parameter window
Application parameters
– Parameter
Channel function
\ Option
Controller channel
– Parameter
Basic-stage cooling [controller]
\ all options except
Deactivated
• The parameter is in the parameter window
Channel X
\ parameter window
Application parameters
.
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 79
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page