ABB i-bus VC/S 4 1 Series, Руководство по эксплуатации продукта, Страница: 39 / 199

ABB i-bus® KNX PARAMETERS
7.2.3.3 Parameter window Temperature controller
The following settings can be made in this parameter window:
• Parameterizing basic load
• Send behavior of control values for the inactive operating mode
• Sending behavior of the current room temperature (actual temperature)
Fig. 12: Parameter window Temperature controller
This parameter window includes the following parameters:
→ ⁠ Minimum control value for basic load > 0, Page ⁠⁠103
→ ⁠ Basic load active when controller off, Page ⁠⁠84
→ ⁠ Send inactive control values cyclically, Page ⁠⁠147
→ ⁠ Cycle for sending the room temperature (0 = deactivated), Page ⁠⁠147
→ ⁠ Temperature change for sending current room temperature, Page ⁠⁠126
Prerequisites for visibility
• Parameter window
Channel X
\ Parameter window
Application parameters
\ Parameter
Channel
function
\ Option
Controller channel
• The parameter window is in the parameter window Channel X .
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 39
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page