ABB i-bus KNX IPS/S 3.5.1, Руководство по эксплуатации продукта

Страница: 11 / 30

ABB i-bus ® KNX
Device technology
IPS/S 3.5.1 | 9AKK107680A8655 EN Rev. A 11
2 Device technology
IPS/S 3.5.1
The ABB i-bus ® IP Interface Secure IPS/S 3.5.1 connects the KNX bus to an Ethernet network.
KNX telegrams can be sent to or received from other devices via the network.
The Interface can be used as a programming interface (ETS), and clients, e.g. Visualisations, can access
the KNX bus via the IPS/S 3.5.1.
The device uses the KNXnet/IP protocol and the KNXnet/IP Security protocol from the KNX Association
(tunneling) for communication.
The device is powered by 12 to 30 V DC or PoE (Power over Ethernet) to IEEE 802.3af class 1.
If both options are connected simultaneously, PoE will be used.
2.1 Technical data
Supply Supply voltage U
s
12…30 V DC (+10% / -15%)
or PoE (IEEE 802.3af class 1)
Power loss Maximum 1.8 W
Current consumption, supply voltage Maximum 120 mA at 12 V
Rated voltage U
n
12 V DC
KNX current consumption < 10 mA
Connections
KNX Bus connection terminal
Operating voltage Plug-in terminal
LAN RJ45 socket for 10/100BaseT,
IEEE 802.3 networks, AutoSensing
Operating and display elements
Red LED and button Assignment of the physical address
Green “On” LED Ready indicator
Yellow “LAN/Link” LED Network connection indicator
Yellow “Telegram” LED KNX telegram traffic indicator
Degree of protection IP 20 To EN 60 529
Protection class II To EN 61 140
Isolation category
Overvoltage category III to EN 60 664-1
Pollution degree 2 to EN 60 664-1
2C
D
C
071
00
8F
001
7