ABB FV4000 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 126

ABB FV4000 Скачать руководство пользователя страница 9

Safety

D184B097U02

FV4000 / FS4000

9

1.6

Plates and symbols

1.6.1 Safety-/ warning symbols, note symbols

DANGER – <Serious damage to health / risk to life>

This symbol in conjunction with the signal word "Danger" indicates an imminent danger.
Failure to observe this safety information will result in death or severe injury.

DANGER – <Serious damage to health / risk to life>

This symbol in conjunction with the signal word "Danger" indicates an imminent electrical
hazard. Failure to observe this safety information will result in death or severe injury.

WARNING – <Bodily injury>

This symbol in conjunction with the signal word “Warning“ indicates a possibly dangerous
situation. Failure to observe this safety information may result in death or severe injury.

WARNING – <Bodily injury>

This symbol in conjunction with the signal word "Warning" indicates a potential electrical
hazard. Failure to observe this safety information may result in death or severe injury.

CAUTION – <Minor injury>

This symbol in conjunction with the signal word “Caution“ indicates a possibly dangerous
situation. Failure to observe this safety information may result in minor or moderate injury.
This may also be used for property damage warnings.

ATTENTION – <Property damage>!

The symbol indicates a potentially damaging situation.
Failure to observe this safety information may result in damage to or destruction of the product
and/or other system components.

IMPORTANT (NOTICE)

This symbol indicates operator tips, particularly useful information, or important information
about the product or its further uses. It does not indicate a dangerous or damaging situation.

«
...
7
8
9
10
11
...
»

Содержание FV4000































































































































Отзывы:

Нет отзывов