ABB FPTC-02, Руководство пользователя

Страница: 66 / 96

￭ Validation procedure
You must do the acceptance test using the checklist given in section
Start-up and acceptance test :
• at initial start-up of the safety function
• after any changes related to the safety function (wiring,
components, safety-function-related parameter settings, etc.)
• after any maintenance work related to the safety function.
The acceptance test must include at least the following steps:
• you must have an acceptance test plan
• you must test all commissioned functions for proper operation,
from each operation location
• you must document all acceptance tests
• you must sign and store the acceptance test report for further
reference.
￭ Acceptance test reports
You must store the signed acceptance test reports in the logbook of
the machine and in the explosion protection document under the
scope of the ATEX User Directive 1999/92/EC. The report must
include, as required by the referred standards:
• a description of the safety application (including a figure)
• a description and revisions of safety components that are used
in the safety application
• a list of all safety functions that are used in the safety application
• a list of all safety-related parameters and their values
• documentation of start-up activities, references to failure reports
and resolution of failures
• the test results for each safety function, checksums, date of the
tests, and confirmation by the test personnel.
You must store any new acceptance test reports performed due to
changes or maintenance in the logbook of the machine and in the
explosion protection document under the scope of the ATEX User
Directive 1999/92/EC.
66 Start-up and acceptance test
31