![background image](http://html.mh-extra.com/html/abb/fpba-01-profibus-dp/fpba-01-profibus-dp_user-manual_197038.webp)
38 Start-up
FPBA-01 configuration parameters – group A (group 1)
Note:
The actual parameter group number depends on the drive
type. Group A (group 1) corresponds to:
•
parameter group 51 in ACSM1, ACS355, ACS380, ACS580,
ACS850 and ACQ810
•
parameter group 51 in ACS880 and ACS880-M04 if the
adapter is installed as fieldbus adapter A or group 54 if the
adapter is installed as fieldbus adapter B.
No. Name/Value
Description
Default
01
FBA type
Read-only.
Shows the fieldbus
adapter type as detected by the
drive. The value cannot be
adjusted by the user.
If the value is
0
= None, the
communication between the drive
and the module has not been
established.
1
=
Profibus_
DP
02
Node address
Each device on the PROFIBUS
network must have a unique node
number. This parameter defines a
node number for the drive the
module is connected to.
Recommended node numbers are
3 to 125 inclusive.
3
0…126
Node number
03
Baud rate
Read-only.
Indicates the detected
communication speed in kbit/s.
1)
Default value is 0 if there is no
connection.
1500
1)
12000
12 Mbit/s
6000 6
Mbit/s
3000 3
Mbit/s
1500
1.5 Mbit/s
500
500 kbit/s
187
187.5 kbit/s
Содержание FPBA-01 PROFIBUS DP
