ABB Feather Duster, Руководство по эксплуатации продукта

Страница: 35 / 150

2 System description
2.1.2. Components overview
33 3HAW050027150 Revision: C
©
Co
py
rig
h
t 201
3-
101
6 ABB. All righ
ts reser
v
ed.
2.1.2. Components overview
Unit overview
The Feather Duster system consists mainly in the ostrich roller, ionization unit, exhaust
system, process cabinet, compressed air system and control cabinet.
Figure 3: System - Components overview
Ostrich roller
The Feather Duster is equipped with an ostrich feather roller. The roller is made up of disks
of feathers stacked on a stainless steel shaft. See Feather roller on page 36 .
Ionization unit
The ionization system consists in an ionizing air knife bar mounted on the trailing edge and
a ionization bar mounted in the mechanical unit. Its purpose is to eliminate static charge from
the feathers and surface to be cleaned. See Ionization on page 37 .
Exhaust system
An adjustable opening that spans the full length of the hood collects all of the dust and
contaminants from the feathers. The air is routed from an exhaust fan to the hood through
ductwork and flexible hose. See Exhaust system on page 38 .
Compressed air system
The air knife is equipped with blowoff tubes which must be supplied in compressed air. See
Compressed air system on page 39 .
Item Description
A Ionizing air knife
B Ostrich roller
C Suction slot with flexible lips
D Ionizing bar
E Anti-collision safe edge