ABB Feather Duster, Руководство по эксплуатации продукта

Страница: 27 / 150

1 Safety
1.4.7. Work inside the manipulator's working range
25 3HAW050027150 Revision: C
©
Co
py
rig
h
t 201
3-
101
6 ABB. All righ
ts reser
v
ed.
1.4.7. Work inside the manipulator's working range
WARNING!
If work must be carried out within the robot's work envelope, the following points must be
observed:
•
The operating mode selector on the controller must be in the manual mode position to
render the enabling device operative and to block operation from a computer link or
remote control panel.
• The robot's speed is limited to max. 250 mm/s when the operating mode selector is in
position < 250 mm/s. This should be the normal position when entering the working
space. The position 100% "full speed" may only be used by trained personnel who are
aware of the risks that this entails.
•
Pay attention to the rotating axes of the manipulator! Keep a distance to the axes in
order not to get entangled with hair or clothing. Also be aware of any danger that may
be caused by rotating tools or other devices mounted on the manipulator or inside the
cell.