manualshive.com logo in svg

ABB Endura AZ25 Series, Руководство пользователя

Поделиться
Скачать
ABB Endura AZ25 Series Скачать руководство пользователя страница 7

Endura AZ25 series probe

Combustion oxygen monitor

1 Safety

OI/AZ25P–EN Rev. E

5

1.10 Safety recommendations

For safe operation, it is imperative that these service instructions be read before use and that the safety recommendations mentioned
herein be scrupulously respected. If danger warnings are not heeded to, serious material or bodily injury could occur.

1.11 Service and repairs

Other than the serviceable items listed in Section B, page 33, none of the instrument's components can be serviced by the user. Only
personnel from ABB or its approved representative(s) is (are) authorized to attempt repairs to the system and only components
formally approved by the manufacturer should be used. Any attempt at repairing the instrument in contravention of these principles
could cause damage to the instrument and corporal injury to the person carrying out the repair. It renders the warranty null and void
and could compromise the correct working of the instrument and the electrical integrity or the CE compliance of the instrument. 

If you have any problems with installation, starting, or using the instrument please contact the company that sold it to you. If this is not
possible, or if the results of this approach are not satisfactory, please contact the manufacturer's Customer Service

1.12 Potential safety hazards

The following potential safety hazards are associated with operating the system: 

Electrical (line voltage) 

Probe weight

AutoCal unit and transmitter enclosure weights

Warning.

The installation of the instrument should be performed exclusively by personnel specialized and authorized to work on

electrical installations, in accordance with relevant local regulations. 

Содержание Endura AZ25 Series









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды