ABB DCS8 Series, Оригинальное руководство пользователя

Страница: 18 / 20

Related standards and directives
Standard Name
EN 60204-1:2006 + AC:2010
IEC 60204-1:2005 + A1:2008 Safety of machinery – Electrical equipment of machines –
Part 1: General requirements
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable
electronic safety related systems - Part 1: General
requirements.
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable
electronic safety related systems - Part 2: Requirements for
electrical/electronic/ programmable electronic safety
related systems.
EN 61800-5-2:2017
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements – Functional
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
IEC 62061:2015 Safety of machinery – Functional safety of safety-related
electrical, electronic and programmable electronic control
systems
EN ISO 12100:2010 Safety of machinery – General principles for design – Risk
assessment and risk reduction
ISO 13849-1:2015 Safety of machinery – Safety-related parts of control
systems – Part 1: General principles for design
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of control
systems – Part 2: Validation
EN ISO 13850:2015
ISO 13850:2015 Safety of machinery. Emergency stop. Principles for design
IEC 61511-1:2016 Functional safety – Safety instrumented systems for the
process industry sector
IEC 61326-3-1: 2008 Electrical equipment for measurement, control and
laboratory use – EMC requirements – Part 3-1: Immunity
requirements for safety-related systems and for equipment
intended to perform safety-related functions (functional
safety) – General industrial applications
2006/42/EC European Machinery Directive
Other Machine-specific C-type standards
Compliance with the European Machinery Directive
The drive is an electronic product which is covered by the European Low Voltage Directive. However, the
drive internal safety function of this manual (Q957) is in the scope of the Machinery Directive as
a safety component. This function complies with European harmonized standards such as EN/IEC
61800-5-2. The declaration of conformity is delivered with the drive.