ABB DCS550 Series, Руководство пользователя

Страница: 154 / 316

154
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Type:
A short code shows the data type:
I = 16-bit integer value (0, …, 65536)
SI = 16-bit signed integer value (-32768, …, 32767)
C = text string (ENUM)
Volatile:
Y = values are NOT stored in the flash, they will be lost when the drive is de-energized
N = values are stored in the flash, they will remain when the drive is de-energized
Parameter groups list
This chapter explains the function and valid values or selections for all parameters. They are arranged in
groups by their function. The following table gives an overview of all parameter groups:
Group Description
10 Start / stop select
11 Speed reference inputs
12 Constant speeds
13
Analog inputs
14 Digital outputs
15 Analog outputs
16 System control inputs
19 Data storage
20
Limits
21 Start / stop
22 Speed ramp
23
Speed reference
24 Speed control
25 Torque reference
26 Torque reference handling
30 Fault functions
31 Motor temperature
34 DCS Control Panel display
40 PID controller
43
Current control
44 Field excitation
45 Field converter settings
50 Speed measurement
51 Fieldbus
52 Modbus
61 Winder control
62 Diameter adaption
63
Tension torque
64 Write selection
66 Winder program control
83
AP control
84 AP
85
User constants
86 AP outputs
88 Internal
90
Receiving data sets addresses
92 Transmit data sets addresses
97 Measurement
98 Option modules
99 Start-up data