ABB CRB 15000, Руководство по эксплуатации продукта, Страница: 1078 / 1096

8.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Example application Material
Base, lower arm, upper arm Aluminium
Cables, motors, brakes Copper
PCBAs, sensors, brake release unit Electronics
Motors, brake release tool Neodymium
Tool flange, protection cap Nickel
Gearboxes Oil, grease
Cables, connectors, holder, covers, and so on Plastic/rubber
Gears, screws, sheet metals, brackets Steel
Continues on next page
1078 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
8 Decommissioning
8.2 Environmental information