![background image](http://html1.mh-extra.com/html/abb/cp600-eco/cp600-eco_operating-instruction_3414584014.webp)
14
4.2 Installation environment
In order to meet the front panel protection classifications, proper installation procedure must be followed:
•
the borders of the cutout must be flat
•
screw up each fixing screw until the plastic bezel corner get in contact with the panel.
•
the cutout for the panel must be of the dimensions indicated in this manual.
The equipment is not intended for continuous exposure to direct sunlight.
This might accelerate the aging process of the front panel film.
The equipment is not intended for installation in contact with corrosive chemical compounds. Check the
resistance of the front panel film to a specific compound before installation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the panel.
The IP66 is guaranteed only if:
•
max deviation from the plane surface to the cut-out:
O
0.5mm
•
thickness of the case where is mounted the equipment: from 1,5mm to 6mm
•
max surface roughness where the gasket is applied:
O
120 um
A.
Installation cut-out
Technical data
Fig. 4.4
Содержание CP600-eCo
Страница 1: ...OPER ATING INSTRUCTION Control Panels CP600 eCo CP604 B CP607 B CP610 B...
Страница 16: ...16 5 Connections 1 Serial Port 2 Ethernet Port 3 USB Port 4 Power Supply Fig 5 1 Connections CP604...
Страница 17: ...17 1 Serial Port 2 Ethernet Port 3 USB Port 4 Power Supply Fig 5 2 Connections CP607...
Страница 18: ...18 1 Serial Port 2 Ethernet Port 3 USB Port 4 Power Supply Fig 5 3 CP610 Connections...