ABB CL Series, Руководство по применению

Страница: 388 / 428

Loading and saving programs
385
1SVC 440 795 M1100
If there are transmission problems, the display system will
display the INVALID PROG message.
This either means that the memory module is empty or that
the circuit diagram on the module contains function relays
that the display system does not recognise.
The analog value comparator function block is only available
on 24 V DC versions of CL-DC2. Programs with visualization
components are only supported by the display system.
Deleting the circuit diagram on the module
X
Select the DELETE CARD menu option.
X
Press OK to confirm the prompt and to delete the module
content.
Press ESC to cancel.
Memory module incompatibility of the programs
CL-SOFT
CL-SOFT is a PC program with which you can create, store,
test and manage display system circuit diagrams.
INVALID PROG
h If the memory module is password-protected, the
password will also be transferred to the display system
memory and will be active immediately.
DELETE ?
h Memory modules with programs are always read by
display system devices with the newer (higher) operating
system version. The program is executable. If programs
are written with a newer operating system (higher
number) on the memory module, this program can only be
read and executed by the same version or a higher one.
h You should only transfer data between the PC and display
system using the special connecting cable, which is
available as an optional accessory CL-LAD.TK001.
h The display system cannot exchange data with the PC
while the circuit diagram display is on screen.