C1300
Advanced circular chart recorder
3 Configuration
54
IM/C1300 Rev. J
3.13 System Clock Configuration
Note.
The System Clock is available only if any of the Totalizer, Math or Timers software options are enabled by installation of the
appropriate software key, or the optional Data Logging hardware is installed.
System Clock Configuration
Press the
key to open the
Main Menu
.
Highlight
Clock
.
System Time
The current settings are displayed.
Set Clock
Select
YES
to set the system date and time.
Select
NO
to retain the current settings.
Set System Date and Time
Use the
and
keys to set each element of the date and time.
Press the
key to move to the next element in the sequence.
Update Clock
Select
YES
to save the new system date and time.
Select
NO
to retain the current settings.
Return to top of page.
Digital I/O
Analog Output
Modbus
Logic Equations
Data Logging
Clock
Pen Function
Calibration
Set Clock
NO
Set Year
2004
System Time
Wednesday
26th May 2004
15:28:59
NO
Set Minute
15:28
Update - NO
Wednesday
26th May 2004
15:29:00
System Time
Wednesday
26th May 2004
15:29:07
