ABB BCU-01, Руководство по оборудованию

Страница: 20 / 24

20 BCU-01/11 control units
Dimensions
Height Width Width with
connector
s
Depth Depth with
memory unit
Depth with
memory unit and
latch
mm in mm in mm in mm in mm in mm in
311 12.2
4
125 4.92 139 5.47 74 2.9 110 4.33 115 4.53
Battery
Real-time clock battery BR2032
Protection classes
Degree of protection
(IEC/EN 60529)
IP10
Overvoltage category
(IEC 60664-1)
II
Protective class
(IEC/EN 61800-5-1)
I
Protective class
(IEC 62109-1)
II
Ambient conditions
Air temperature in
operation
+0 to +70 °C (158 °F)
Materials
Housing Hot-dip zinc coated steel
Package Cardboard
Parts Name Hazard Substance
(Pb)
(Hg) (Cd)
(Cr
6+
)
(PBB) (PBDE)
PCBA
× ○ ○ ○ ○ ○
Metal parts
○ ○ ○ ○ ○ ○
Plastic parts
○ ○ ○ ○ ○ ○
Other Nonmetal parts
○ ○ ○ ○ ○ ○
Fans
○ ○ ○ ○ ○ ○
Cable/wires
○ ○ ○ ○ ○ ○
This table is made according to SJ/T 11364
○
：
means the content of this hazard substance in the homogeneous materials of the parts is less
than the limit requirement in GB/T 26572
×
：
means the content of this hazard substance in the homogeneous materials of the parts is
exceed the limit requirement of GB/T 26572
PCBA: include Printed Circuit Board and the components.
Depending on the model/type of product, it may not contain all of the above parts. It is subject to
the purchased actual product model/type.
This environmental protection period applies only when the product is used according to the
conditions required by the user manual.
To protect the environment and human health:
1. The scrapped product should be separated from domestic waste and sent to a qualified place of
disposal.
2. Recycling center should use appropriate methods to recycle/deal with the materials.
3. For more information about this product recycling, please contact local government, recycling
center or your local dealer.