background image

GUID-D8442EFF-ACD7-404C-8540-4C64E2631BD4 V1 EN

Figure 23:

Rebooting Arctic device

The 

Running and old batches list

 shows the started batch update. The 

Status

column indicates how many of the total number of reboot tasks have been
finished.
When all update tasks are finished, the duration of the batch update is shown in
the 

Status

 column.

GUID-49481E45-8D4D-4AF3-A896-79B5AE00F482 V1 EN

Figure 24:

Running and old batches list for rebooting

7.3.3 

RIO600 device management

Remote RIO600 devices connected to an Arctic device can be updated using the tools
available in ARM600 WHMI's Arctic Patrol application. It is possible to transfer a
new configuration as well as firmware to the RIO600 devices. However, the RIO600
device configuration and maintenance is always handled with PCM600.

If enabled in the Arctic wireless devices’ configurations, the Arctic wireless devices
scan their local networks for RIO600 devices and report them to the ARM600’s Patrol
view. The RIO600 devices are separately listed under each Arctic device the way they
were found on the network. Although the ARM600’s asset management features do
not have any knowledge of the RIO600 device composition, software or
configuration, it attempts to show this information whenever available.

Asset management actions may be performed on the RIO600 devices by selecting
them from the device list in the same way as the Arctic devices.

The asset management functionality for RIO600 is available from
ARM600 Ver.4.3.1 onwards and with Arctic devices' firmware Ver.
3.4.1 onwards.

Section 7

1MRS758861 A

Arctic Patrol

40

ARM600

User Manual

Содержание ARM600









































































Отзывы: