ABB ARG600 Single SIM Variant, Руководство пользователя

Страница: 38 / 64

7.3 Restoring factory default settings
1. In the left pane, under Tools , click Default settings .
2. Select a configuration profile to overwrite with the factory default settings.
3. Click Submit .
4. In the confirmation dialog, click OK .
5. Restart the device.
7.4 Updating the firmware
Save a configuration profile as a backup of the current configuration before starting
the firmware update.
Check that a valid firmware package is stored on the PC before attempting to
update the firmware.
1. In the left pane, under Tools , select Firmware Update .
The current firmware version is shown in the Firmware Update view.
2. Click Browse to open the file selection dialog.
3. Select the new firmware file.
4. Click Update .
A confirmation dialog opens.
5. Click OK to confirm firmware.
The update takes a few minutes.
6. Once the update is finished, restart the device.
7.5 Saving configuration profiles
It is possible to save the device’s configuration in a profile for use in other devices
or as a backup when updating the firmware. The configuration can be exported as
an XML file.
1. In the left pane, under Tools , select Configuration profiles .
2. Click Create a new profile .
3. Select a profile to clone.
Selecting
Last Boot allows saving the configuration in use when the device
was booted the previous time.
4. Type a name for the profile.
5. Click Submit to save the profile.
It is possible to clone, export, and import profiles in the same view.
Section 7
1MRS758456 H
Additional system configuration
32 ARG600 Single SIM Variant
User Manual