manualshive.com logo in svg

ABB Arc Guard System TVOC-2, Руководство по установке и обслуживанию

Поделиться
Скачать
ABB Arc Guard System TVOC-2 Скачать руководство пользователя страница 66

Human Machine Interface, functions

64

1 Trip Log

When the optical detectors detect arcs, the Arc Monitor reacts. The system 
will trip the trip contacts according to the configuration on the DIP switches.

Arc Monitor is designed to save information about an arc in the Trip Log. 

The Trip Log can store seven trips in a circular buffer, the oldest will be over-
written.

This section describes how to handle the Trip Log.

Trip notification 
window

When a trip occurs a notification window will be displayed on the display.

The notification window display the following:

•

Which detector reacted. 

•

Which trip contact tripped.

•

Time and Date the arc occurred.

To reset the Trip Signal Relays, K2 and K3 do the following steps:

1

In the notification window press Reset.

2

The notification window disappears and the system returns to Start window.

3

The trip is stored in the Trip Log.

Note!

If Auto reset of K2 and K3 is configured at the DIP switches, the notification 
window will appear at a trip but there is no need to reset. Then press Menu 
to return to Start window.

Trip has occured

Reset

Detector X1 : 10

Breaker K4 K5

14:02  3-feb-2009

Содержание Arc Guard System TVOC-2



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды