4 Introduction
After the program is downloaded to the memory unit with the license key, the program
remains there unless you remove it. This makes it possible for you to upgrade the
Centrifuge Decanter application later on a separate Centrifuge Decanter loading package.
If the program was loaded to the memory unit without the license key, then the drive
indicates a fault
. See the auxiliary fault code in the Event logger to
know the plus code of the missing license, in this case N8015. For further assistance,
contact your local ABB representative.
Safety
The complete safety instructions are given in the Hardware or Safety Manual delivered
with the drive. Read the safety instructions before attempting any work on the unit.
Read the software function specific warnings and notes before changing the default
parameter values. For each function, the warnings and notes are given in the section
describing the related user-adjustable parameters.
Intended audience
The reader of this manual is expected to have a basic knowledge of ABB products,
terminologies, standard electrical wiring practices, electronic components and electrical
schematic symbols.
Contents
This manual consists of the following chapters:
(page
) provides an overview of this manual.
) provides instructions to start-up a Centrifuge and describes
the default control connections for using the Centrifuge and Decanter drive.
(page
) provides an overview of the core features of the
Centrifuge application.
(page
) provides an overview of the core features of the
Decanter application.
(page
) describes the user adjustable settings of the required
parameter groups for operating the Centrifuge and Decanter drive.
(page
) lists all the alarm, faults and warning messages related to the
Centrifuge Decanter drive and describes the possible cause and corrective actions.
Additional parameter data contains further information on the parameters.
Related documents
See
on page
(inside the front cover).
Содержание ACS880 Series
