ABB ACS880 N5700 Series, Руководство по прошивке

Страница: 442 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1 = Initiate superimposed movement
Note: Bit value transition behavior defined by 74.15
Position command trigger type.
Superimposed b1
Reserved b2
1 = Initiate phasing relative movement
Note: Bit value transition behavior defined by 74.15
Position command trigger type.
Phasing relative b3
Reserved b4
1 = Initiate position latching routine 1 Latch 1 b5
1 = Initiate position latching routine 2 Latch 2 b6
1 = Start virtual master with defined velocity
0 = Stop virtual master Virtual master b7
1 = Jog virtual master in forward direction
0 = Stop jogging in forward direction Virtual master jog
forward b8
1 = Jog virtual master in reverse direction
0 = Stop jogging in reverse direction Virtual master jog
reverse b9
1 = Initiate stop function for virtual master axis Virtual master stop b10
Reserved b11…15
1 = 1 0000h…FFFFh
- / uint16 User-specific position control word 1. The word can be
used to store control signals received through the
fieldbus
interfaces (eg. groups 53 FBA A data out and 56 FBA B
data out). The individual bits of this word can then be
selected as the source of positioning commands
defined elsewhere (for example, see the parameters
starting from 74.20). User Position
control word 1 74.7
User bit 0 b0
User bit 1 b1
User bit 2 b2
User bit 3 b3
User bit 4 b4
User bit 5 b5
User bit 6 b6
User bit 7 b7
User bit 8 b8
User bit 9 b9
User bit 10 b10
User bit 11 b11
User bit 12 b12
User bit 13 b13
442 Parameters