ABB ACS880-37LC-0390A-7, Руководство по оборудованию, Страница: 186 / 242

The contacts of both relays are wired to a terminal block in the drive cubicle; see the
drive-specific circuit diagrams for details. The external voltage switched by the contacts is
to be connected to the same terminal block.
￭
K3 contact data
• Rated operational AC current ( I
e
) (IEC/EN 60947-5-1 AC 15):
• 24…127 V, 50/60 Hz: 6 A
• 220…240 V, 50/60 Hz: 4 A
• 400…440 V, 50/60 Hz: 3 A
• 500 V, 50/60 Hz: 2 A
• 690 V, 50/60 Hz: 2 A
• Rated making/breaking capacity (IEC/EN 60947-5-1 AC 15): 10 × I
e
AC
• Rated operational DC current ( I
e
) (IEC/EN 60947-5-1 DC 13):
• 24 V DC: 6 A / 144 W
• 48 V DC: 2.8 A / 134 W
• 72 V DC: 1 A / 72 W
• 110 V DC: 0.55 A / 60 W
• 125 V DC: 0.55 A / 69 W
• 220 V DC: 0.27 A / 60 W
• 250 V DC: 0.27 A / 68 W
• 400 V DC: 0.15 A / 60 W
• 500 V DC: 0.13 A / 65 W
• 600 V DC: 0.1 A / 60 W
• Rated short-time withstand current: 100 A for 1.0 s, 140 A for 0.1 s
• Minimum switching capacity: 12 V / 3 mA
￭
K62 contact data
• Switching power: 3 VA or 3 W minimum, 2000 VA or 200 W maximum
• Switching capacity, AC (IEC/EN 60947-5-1 AC 15):
• NC: 230 V, 1 A
• NO: 230 V, 3 A
• Switching capacity, DC (IEC/EN 60947-5-1 DC 13):
• NC / NO: 24 V, 2 A
• Switching capacity (UL 508): R300
Efficiency
96.8 … 98.6% at nominal power level depending on drive type
The efficiency is not calculated according to the ecodesign standard IEC 61800-9-2.
186 Technical data