ABB ACS880-34, Руководство по оборудованию

Страница: 132 / 256

132 Installation example of the standard drive module configuration
Required parts
Required tools
•
Set of screw drivers (Torx and Pozidriv)
•
Set of metric magnetic-end hexagon sockets
•
Torque wrench
•
Step drill bit for drilling the holes in the clear plastic shroud for input power cables.
Overall flowchart of the installation process
Drive module standard parts
• Drive module
• Fastening brackets (2 pcs)
• Pedestal guide plates (2 pcs)
• Telescopic extraction and insertion ramp
• Fastening screws and insulators in a plastic bag
• External control unit
Rittal parts / Alternative ABB parts
Rittal part code
Qty
(pcs)
Description
TS 131 800 1 Enclosure without mounting plate, bottom plates and side panels. Includes
supports for installing air baffles.
TS 7967.000
(one set = four pieces) 1 Spacers for roof plates. / ABB roof
TS 8612.580 1 Punched section with mounting flange, outer mounting level for 800 mm
horizontal
Contact ABB for the
suitable filter 4 Air filter. Remove the filter mats.
Alternative ABB parts for Rittal parts
ABB air inlet kit 800 mm
3AUA0000117005 (IP20)
3AUA0000117009 (IP42) 2 See section Air inlet kits on page 176 .
ABB air outlet kit 800 mm
3AUA0000125203 (IP20 )
3AUA0000114968 (IP42) 2 See section Air outlet kits on page 178 .
Customer-made parts (not ABB or Rittal products)
Air baffles 4 See section Air baffles for the standard drive module on page 212 .
Bottom plate 1 See section Bottom plate on page 211 .
Step Task For instructions, see
1 Install the Rittal parts, drive bottom guide plate
and loose drive options in the drive module
cubicle. Installing the drive module and LCL filter
module into a cabinet
on page 133 .
2 Install the auxiliary components (such as
mounting plates, air baffles, switches, busbars
etc.). The component manufacturer’s instructions
Preventing the recirculation of hot air on page
52 .