ABB ACS880-204LC, Руководство по оборудованию

Страница: 193 / 278

Ambient conditions
The unit is to be used in a heated indoor controlled environment.
Transportation in protect-
ive package
Storage in protective
package
Operation installed for
stationary use
- - 0…4000 m (13123 ft)* Altitude above sea level
Output derated above 1000
m (3281 ft). See section
Altitude derating.
*Neutral-grounded TN and
TT network systems, non-
corner-grounded IT net-
work systems. Corner-
grounded TN, TT and IT
network systems up to 600
V.
-40 … +70 °C -40 … +70 °C 0 … +45 °C
(+32 … +113 °F), no con-
densation allowed. Output
derated in the range
+45 … +55 °C
(+113 … +131 °F). Air temperature
(-40 … +158 °F) (-40 … +158 °F)
Maximum 95%, no con-
densation allowed Maximum 95%, no con-
densation allowed Maximum 95%, no con-
densation allowed Relative humidity
No condensation allowed. Maximum allowed relative humidity is 60% in the presence
of corrosive gases.
IEC 60721-3-2 IEC 60721-3-1 IEC/EN 60721-3-3:2002:
Classification of environ-
mental conditions - Part 3-
3: Classification of groups
of environmental paramet-
ers and their severities -
Stationary use of weather
protected locations Contamination
Class 2C2 Class 1C2 Class 3C2 Chemical gases
Class 2S2 Class 1S3 (packing must
support this, otherwise
1S2) Class 3S1 Solid particles
No conductive dust al-
lowed.
IEC/EN 60721-3-1:1997 IEC/EN 60721-3-1:1997 IEC 61800-5-1 Vibration
IEC 60068-2-6:2007,
EN 60068-2-6:2008 Envir-
onmental testing Part 2:
Tests -Test Fc: Vibration
(sinusoidal)
10 … 57 Hz, max.
0.075 mm amplitude
57 … 150 Hz 1 g
Tested in a typical cabinet
assembly according to:
Max. 1 mm (0.04 in.)
(peak value, 5 … 13.2 Hz),
max. 0.7 g
(13.2 … 100 Hz) sinusoidal
Technical data 193