ABB ACS880-1607LC, Руководство по оборудованию

Страница: 27 / 106

￭ Type designation label of the BDCL filter module
Each filter module has a type designation label attached to it.
An example label is shown below.
ESTONIA
900 A
3AUA0000190873
S/N: 15390051
BDCL-15LC-7
1
2
3
4
5
6
Description No.
Type designation 1.
Degree of protection 2.
Ratings 3.
Code of the filter 4.
Valid markings. See Electrical planning instructions for ACS880 multidrives cabinets and modules
(3AUA0000102324 [English]).
5.
Serial number 6.
Type designation key
￭ Type designation key of the converter unit
The type designation describes the composition of the unit in short. The type designation
is visible on the label (sticker) which is attached to the cabinet. The complete designation
code is divided in subcodes:
• The first 1…18 digits form the basic code. It describes the basic construction od the
unit. The fields in the basic code are separated by hyphens.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
DESCRIPTION CODE
Basic codes
Product series ACS880
Construction: cabinet-installed liquid-cooled DC/DC converter unit. When no options are se-
lected: Supply frequency 50 Hz, control voltage 230 V AC, IP42, EN/IEC industrial cabinet
construction, power and control cabling through the bottom of the cabinet, DC busbar material
tin plated copper, cable supply conductors, standard wiring material, ACS880 DC/DC converter
control program, complete documentation in English in memory stick. 1607LC
Size
Refer to ratings table in the technical data. 600A
Voltage range
DC voltage corresponding AC input voltages 3 〜 525…690 V. This is indicated in the type
designation label as typical input voltage level 742 / 849 / 976 V DC.
7
Operation principle and hardware description 27