ABB ACS880-04F-504A-3, Руководство по оборудованию

Страница: 34 / 202

Description Code
380…415 V AC. This is indicated in the type designation label as typical input voltage level
(3~ 400 V AC)
-3
380…500 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 400/480/500 V AC)
-5
525…690 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 525/600/690 V AC)
-7
￭
Option codes
Description Code
No IP20 shrouds for cabling area 0B051
Wall mounting kit (to be used, if the module is mounted on the wall from its back instead of
the flange)
C217
Brake choppers D150
EMC filter for 2nd environment TN (grounded) system, category C3 E200
EMC filter for 2nd environment IT (ungrounded) system, category C3 E201
Common mode filter E208
No full size cable connection terminals for output power cables 0H371
DC connection busbars H356
Full-size input terminals H370
No control panel 0J400
DPMP-01 door mounting kit J410
DPMP-02 door mounting kit (surface mounting) for the panel J413
ACS-AP-I control panel J425
ACS-DCP-11 drive connectivity panel (EU variant) J461
FDNA-01 DeviceNet™ adapter module K451
FPBA-01 PROFIBUS DP adapter module K454
FCAN-01 CANopen adapter module K457
FSCA-01 RS-485 (Modbus/RTU) adapter module K458
FCNA-01 ControlNet™ adapter module K462
FECA-01 EtherCat adapter module K469
FEPL-02 EtherPOWERLINK adapter module K470
FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
K475
FEIP-21 EtherNet/IP adapter module K490
FMBT-21 Modbus/TCP adapter module K491
FPNO-21 PROFINET IO adapter module K492
FIO-11 analog I/O extension module (1, 2 or 3 pcs) L500
FIO-01 digital I/O extension module L501
FEN-31 HTL incremental encoder interface module L502
FDCO-01 optical DDCS communication adapter module L503
FDCO-02 optical DDCS communication adapter module L508
FEN-21 resolver interface module L516
FEN-01 TTL incremental encoder interface module L517
34 Operation principle and hardware description