ABB ACS860, Руководство по прошивке, Страница: 265 / 438

Parameters 265
60.10 M/F ref1 type Selects the type and scaling of reference 1 received from the
master/follower link. The resulting value is shown by
03.13
M/F or D2D ref1 .
Auto
Auto Type and scaling are chosen automatically according to which
reference chain (see settings
Torque , Speed , Frequency ) the
incoming reference is connected to. If the reference is not
connected to any chain, no scaling is applied (as with setting
Transparent ).
0
Transparent No scaling is applied. 1
General Generic reference with a scaling of 100 = 1 (ie. integer and
two decimals). 2
Torque The scaling is defined by parameter 46.03 Torque scaling . 3
Speed The scaling is defined by parameter 46.01 Speed scaling . 4
Frequency The scaling is defined by parameter 46.02 Frequency scaling . 5
60.11 M/F ref2 type Selects the type and scaling of reference 2 received from the
master/follower link. The resulting value is shown by
03.14
M/F or D2D ref2 .
For the selections, see parameter 60.10 M/F ref1 type .
Torque
60.12 M/F act1 type Selects the type/source and scaling of actual value ACT1
transmitted to the master/follower link. Auto
Auto Type/source and scaling follow the type of reference 1
selected by parameter
60.10 M/F ref1 type . See the individual
settings below for the sources and scalings.
0
Transparent Reserved. 1
General Reserved. 2
Torque 01.10 Motor torque is sent as actual value 1. The scaling is
defined by parameter 46.03 Torque scaling .
3
Speed 01.01 Motor speed used is sent as actual value 1. The scaling
is defined by parameter 46.01 Speed scaling .
4
Frequency 01.06 Output frequency is sent as actual value 1. The scaling
is defined by parameter 46.02 Frequency scaling .
5
60.13 M/F act2 type Selects the type/source and scaling of actual value ACT2
transmitted to the master/follower link. Auto
Auto Type/source and scaling follow the type of reference 2
selected by parameter
60.11 M/F ref2 type . See the individual
settings below for the sources and scalings.
0
Transparent Reserved. 1
General Reserved. 2
Torque 01.10 Motor torque is sent as actual value 2. The scaling is
defined by parameter 46.03 Torque scaling .
3
Speed 01.01 Motor speed used is sent as actual value 2. The scaling
is defined by parameter 46.01 Speed scaling .
4
Frequency 01.06 Output frequency is sent as actual value 2. The scaling
is defined by parameter 46.02 Frequency scaling .
5
60.14 M/F follower
selection (Effective in the master only.) Defines the followers from which
data is read. See also parameters
62.28 … 62.33 .
None
Follower node 2 Data is read from the follower with node address 2. 2
None None. 0
No. Name/Value Description Def / FbEq16