ABB ACS850-04 series, Руководство по прошивке

Страница: 139 / 296

Parameters 139
15
15 Analogue outputs Selection and processing of actual signals to be indicated
through the analogue outputs. See section
Programmable
analog outputs on page 72.
15.01 AO1 src Selects a drive signal to be connected to analogue output
AO1.
Speed rpm 01.01 Motor speed rpm (see page 94 ). 1073742081
Speed % 01.02 Motor speed % (see page 94 ). 1073742082
Frequency 01.03 Output frequency (see page 94 ). 1073742083
Current 01.04 Motor current (see page 94 ). 1073742084
Current % 01.05 Motor current % (see page 94 ). 1073742085
Torque 01.06 Motor torque (see page 94 ). 1073742086
Dc-voltage 01.07 Dc-voltage (see page 94 ). 1073742087
Power inu 01.22 Power inu out (see page 94 ). 1073742102
Power motor 01.23 Motor power (see page 94 ). 1073742103
SpRef unramp 03.03 SpeedRef unramp (see page 101 ). 1073742595
SpRef ramped 03.05 SpeedRef ramped (see page 101 ). 1073742597
SpRef used 03.06 SpeedRef used (see page 101 ). 1073742598
TorqRef used 03.14 Torq ref used (see page 101 ). 1073742606
Process act 04.03 Process act (see page 102 ). 1073742851
Proc PID out 04.05 Process PID out (see page 102 ). 1073742853
Pointer Value pointer setting (see Terms and abbreviations on page
93 ).
-
15.02 AO1 filt time Defines the filtering time constant for analogue output AO1.
0.000 … 30.000 s Filter time constant. 1000 = 1 s
15.03 AO1 out max Defines the maximum output value for analogue output AO1.
0.000 … 22.700 mA Maximum AO1 output value. 1000 = 1 mA
15.04 AO1 out min Defines the minimum output value for analogue output AO1.
0.000 … 22.700 mA Minimum AO1 output value. 1000 = 1 mA
No. Name/Value Description FbEq
63
%
100
T
t
O = I × (1 - e
-t /T
)
I = filter input (step)
O = filter output
t = time
T = filter time constant
Unfiltered signal
Filtered signal