98 Practical examples
Restoring a backup file into the RDCU or NDCU board
Restore a backup file into the RDCU or NDCU board as follows:
1. Select from the
File
menu
System Software
/
Open
command.
2. In the
Open
box, select the backup package and press
Open
.
3. Select
System Software
/
Restore
command.
4. Select the converter into which you want to restore the backup file.
5. Select the right backup file from the backup folder. (It may contain more than one
backup.)
6. If you are sure of the restoring, press
Yes
.
7. Do not operate the converter or PC during the restoring.
Note:
You can not restore any converter while another converter is in local control.
Содержание ACS800-67
