ABB ACS580 Series, Руководство по оборудованию

Страница: 91 / 468

￭
Installing the drive vertically, frames R6…R9
Select fasteners and their application to meet local requirements appropriate to
wall surface materials, drive weight and application.
1. Mark the hole locations for the six mounting holes using the mounting template
included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings in
chapter
Dimension drawings (page 363) .
Note: You can use only two bolts instead of four to attach the lower part of
the drive.
R9 R8 R7 R6
in mm in mm in mm in mm
c
a
d
e
b
1
× 4
28.3 718 27.6 701 24.5 623 22.5 571 a
25.9 658 25.9 658 23.0 583 20.9 531 b
13.6 345 10.3 263 9.7 245 8.4 213 c
11.8 300 11.8 300 11.8 300 11.8 300 d
7.9 200 6.19 155 6.1 155 6.1 155 e
lb kg lb kg lb kg lb kg
IP21,
UL Type 1
213.9 97 152.2 69 119.1 54 93.5 42.4
lb kg lb kg lb kg lb kg
IP55,
UL Type 12
227.1 103 169.8 77 123.5 56 94.8 43
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes and start the bolts into the anchors
or plugs.
4. Position the drive onto the bolts on the wall. Lift the drive with a lifting device
as it is heavy.
5. Tighten the top two bolts in the wall securely.
Mechanical installation 91