ABB ACS580 Series, Руководство по прошивке

Страница: 57 / 462

Settings, I/O and diagnostics on the control panel 53

Clock, region, display
The Clock, region, display submenu contains settings for language, date and time,
display (such as brightness) and settings for changing how information is displayed
on screen.
The table below provides detailed information about the available setting items in the
Clock, region, display menu.
User sets This submenu s you to save multiple sets of
settings for easy switching. For more information
about user sets, see
User parameter sets on page
139 .
96.11 User set
save/load
96.10
User set status
96.12 User set I/O mode
in1
Menu item Description Corresponding
parameter
Language Change the language used on the control panel
screen. Note that the language is loaded from the
drive so this takes some time. 96.01 Language
Date & time Set the time and date, and their formats.
Units Select the units used for power, temperature and
torque.
Drive name: The drive name defined in this setting is shown in
the status bar at the top of the screen while using
the drive. If more than one drives are connected to
the control panel, the drive names make it easy to
identify each drive. It also identifies any backups
you create for this drive.
Contact info in fault
view Define a fixed text that is shown during any fault
(for example, who to contact in case of a fault).
If a fault occurs, this information appears on the
panel screen (in addition to the fault-specific
information).
Display settings Adjust the brightness, contrast and display power
save delay of the panel screen or to invert white
and black.
Menu item Description Corresponding
parameter
ACS580 FW.book Page 53 Wednesday, September 21, 2016 9:48 PM